Automatic Single PE Coated Paper Cup Making Machine Speed 50 - 60 Pcs/min

Main feature:

1, Output is improved: The productivity is improved from 50-60 pcs/min to 60-70 pcs/min.

2, Stepping-motor is used to control the bottom paper feeding, so that the gap between the bottom-       paper is controlled within 0.1mm, which can make machine more stable and save raw material. With light eyes under the paper roll, the machine will be stopped when out of bottom-paper, avoiding the waste in paper.

3 , Gear drive is adopted to avoid the defect of loose gap of chain drive.

4, We use a self-lubrication system in the machine, which reduces the friction between the parts. And we do not need to add the oil manually. Sometimes worker are not willing to add the oil everyday. In this case the machine can be maintained without manually fueling.

5, This device adopt non-contact multi-point light control switch (such as in paper holder, cup tube ,bottom paper and so on, according to customer demand). It can detect working situation, then achieve a fault alarm preventing machine from collision, makes the machine more stable and longevous.

6, Paper tube station uses independent cam to handle cup holder. This is advanced in stability and will not make noise when it works.

7, The machine is equipped with gear motor simplifies the complicated system and makes the machine more stable.

Quick Details:

Description:

Model ZBJ-H12 Paper Cup Making Machine is an automatic machine with multi-working station, functions of failure alarm, photocell detection, counter and easier maintain, safer operation and. the advantages of humanism design.

Specifications:

Competitive Advantage:

1. We using Divided box is 125 type, which has two years warranty.
2. We using Speed reducer: 1:30 100 type
3. We using φ30 import steel shaft for the machine
4. We using 3 Cam to control the folding process.
5. We using two times paper feeding process.
6. We using Multilayer suckers for the paper taking
 

Applications:

Produce for Coffee Cup, Tea Cup, Juice Cup, Ice Cream Cup etc

Making Process

Printing Step: The Pe coated paper should be printed with different design and different color. So when we make the paper, there will be beautiful design with logo on the cups.

Cutting Step: In this step, you should decide the size of the cup, so we can cut the paper fan in decided size.

Paper Forming Step: You should put the paper fan on the machine, so the paper fan could be folded by the paper cup machine. Then the paper cups are formed, we can use the cups and enjoy delicious drinks.

Technical Specification:

The part we used VS normal one:

1) We use 125 type gear box, which has two years warranty.

Normally, 100 type gear box is used.

1. 125 type is much bigger and stronger than 100 type.
2. 100 type gear box, if used for one year, is easier to have problem.

2) We use 1:30 100 type Speed reducer

Normally 1:20 80 type speed reducer is used.

1. 1:30 100 type speed reducer is more stable than 1:20 80 type speed reducer.

The speed reducer and the gear box are very important to the machine. They control the whole machine, if there are some problems with these two parts, then, you have to change the gear box and speed reducer. In this case, the machine should be taken apart, because they are inside the machine. It takes much time, and sometimes you cannot install the machine correctly. So it is necessary to use better gear box and speed reducer.

3) We useφ30 import steel shaft for the machine.

Normally φ25 steel shaft is used.

1. φ30 steel shaft has longer life and is resistant to wear.

4) We use 3 Cam to control the folding process.

Normally 1 Cam is used to control the folding process.

 Mr. Leon

Tel: 86-577-65566111

Contact to this supplier